Discussion Central

Expand all | Collapse all

Proper sizing of suction strainer

  • 1.  Proper sizing of suction strainer

    Posted 03-26-2020 21:40
    Good day,

    I am working on selecting a suitable suction strainer for a pump (crude oil / slops service which takes suction from a sump-base sediment and particles present). Can any insight as to possible types of strainers to be used? I am aware that the following is required for sizing the strainer:
    1. flow rate, viscosity of fluid
    2. NPSHa of pump to gauge the allowable pressure drop
    3. mesh size (centrifugal pumps can tolerate 1/4" particles)
    4. I am proposing a basket strainer with a spare, which will have a differential pressure gauge

    What are typical type / model / brand of strainers used in this service?


    ------------------------------
    Shantal Ramdeo PE
    Senior Process Engineer
    Heritage Petroleum Company Limited
    Princes Town
    ------------------------------


  • 2.  RE: Proper sizing of suction strainer

    Posted 03-28-2020 09:28
    Shantal,

    Many companies make the type of strainer you are looking for, and there are many variations of the design, materials, etc.  One company I've used in the past is Stayflow, check the selections on the links below.  Best to work with the company's sales person or a representative to get exactly what you need.  Good luck!

    http://www.stayflowproducts.com/Basket_Strainers?gclid=EAIaIQobChMI2LOSyaG96AIVF26GCh2ATQ6DEAAYASAAEgIhAPD_BwE

    Fabricated Strainershttp://www.stayflowproducts.com/Fabricated_Strainers



    ------------------------------
    Barry Juran PE
    Consultant
    Philadelphia PA
    Chemical Process Engineer and Sr. Biopharm Specialist
    ------------------------------



  • 3.  RE: Proper sizing of suction strainer

    Posted 03-29-2020 14:22
    I would recommend you install a double strainer that can be cleaned without shutting down the process.

    ------------------------------
    Richard Sander
    Maple Glen PA
    ------------------------------



  • 4.  RE: Proper sizing of suction strainer

    Posted 03-29-2020 14:33
    Good day,
    Yes i was installing one in parallel with the same specs
    Regards,
    Shantal Ramdeo